Livewell & Bilge

Available in lengths from 6′ to 17′ in one foot incrementsEach cable includes the brass attachment nut and quick disconnect locking retainerAttaches to the actuator

Available for a variety of Flow-Rite partsHigh quality Viton materialMD-014 Replacement O-Rings are only compatible with the 3/4″ Qwik-Lok Socket

Features: Qwik-Lok design, Venturi air-intake, locking nut, mixing tube and a discharge portLeave approximately 3/16” of threads on thru-hull exposed for the locking nut which is designed to allow the mixing tube assembly to swivel if bumped while preventing detachmentDischarge port can be rotated in any direction to circulate the water in the livewell

Higher flow – the optimized impeller provides greater flow at the same amperage; Flow Rate: 500 GPHBuilt-in thermal cut-off (TCO) provides added protection for the pump and vessel; Ignition protectedBackflow prevention – the non-return prevents water left in the discharge from running back, keeping bilges dryer and cleaner

Capacity 3ft head: 60 L/min – 952 GPHCapacity Straight: 73 L/min – 1150 GPHAmperage: 3A

750 Gallons Per HourVoltage: 12VPump Angle: Straight

Includes both a straight and 90° smooth elbow Dura-Port as well as removable check valveVoltage: 12VAmp Draw: 2.5

Fully submersibleOnly use one intake for both the livewell and raw water wash down pump3/4″ tapered inlet provides smooth flow of water